Impact of material-dependent energy reflection coefficient on divertor heat flux in the Large Helical Device
Y. Hayashi et al., “Impact of material-dependent energy reflection coefficient on divertor heat flux in the Large Helical Device”, Fusion Engineering and Design 222 (2026) 115509.
Sintering Method of Pure Boron Pellet for Advanced Fusion Reactor
H. Noto et al., “Sintering Method of Pure Boron Pellet for Advanced Fusion Reactor”, Plasma and Fusion Research 20 (2025) 1205050.
Accident-tolerant hybrid ceramics for fusion breeding blanket
K. Mukai et al., “Accident-tolerant hybrid ceramics for fusion breeding blanket”, Materials & Design 253 (2025) 113964.
Development of a heated liquid Sn flowing system and preliminary results of wettability improvement by inter-metallic layer
Y. Hamaji et al., “Development of a heated liquid Sn flowing system and preliminary results of wettability improvement by inter-metallic layer” Fusion Engineering and Design 210 (2025) 114727.
Heat flux mitigation characteristics in the radiative divertors with multi-peaks of heat flux in the large helical device
Y. Hayashi et al., “Heat flux mitigation characteristics in the radiative divertors with multi-peaks of heat flux in the large helical device”, Plasma Phys. Control. Fusion 67 (2025) 025010.
核融合炉の先進液体金属ブランケットの実現に見通し - 600℃の液体燃料増殖材流動場に耐えるFeCrAl系酸化物分散強化合金の優れた耐食性 -
田中照也准教授らは、核融合炉の先進液体金属ブランケットの運転環境を、液体金属燃料増殖材である液体リチウム鉛合金を用いた高温熱流動実験で再現することに成功しました。
核融合炉液体金属ブランケットの電磁ブレーキ効果の抑制へ- 保護性α-Al2O3膜が異常酸化現象を克服 -
田中照也准教授らの研究チームは、FeCrAl合金が保護性α-Al2O3膜を形成する際に引き起こす異常酸化現象の原因を特定し、その改善策を見出しました。
Simultaneous measurements for fast neutron flux and tritium production rate using pulse shape discrimination and single crystal CVD diamond detector
M. Kobayashi et al., “Simultaneous measurements for fast neutron flux and tritium production rate using pulse shape discrimination and single crystal CVD diamond detector”, Nuclear Fusion 64 (2024) 066026.
Application of two-dimensional temperature response functions for reconstruction of divertor heat flux profile in commercial fusion reactors
X. N. S. Bui, H. Matsuura, Y. Hayashi, K. Nagaoka and S. Masuzaki, “Application of two-dimensional temperature response functions for reconstruction of divertor heat flux profile in commercial fusion reactors”, Rev. Sci. Instrum. 95 (2024) 033505.
Study on photoluminescence properties of Er2O3 materials as irradiation damage and temperature sensors
T. Tanaka et al., “Study on photoluminescence properties of Er2O3 materials as irradiation damage and temperature sensors”, Nuclear Materials and Energy 38 (2024) 101614.
Effects of annealing temperature on microstructure and hardness of cold rolled high-purity V-4Cr-xTi alloys
Jingjie Shen et al., “Effects of annealing temperature on microstructure and hardness of cold rolled high-purity V-4Cr-xTi alloys”, Fusion Engineering and Design 194 (2023) 113905.
Measurement of 6Li burn-up reaction rate using a single crystal CVD diamond detector under fast neutron irradiation environment
M. Kobayashi et al., “Measurement of 6Li burn-up reaction rate using a single crystal CVD diamond detector under fast neutron irradiation environment”, Fusion Engineering and Design 193 (2023) 113799.